A Multi-Band 65 nm CMOS Power Amplifier Using Frequency Transformation Technique
DOI:
https://doi.org/10.38124/ijsrmt.v5i6.1546Keywords:
65-nm CMOS, Multi-Band RC-FeedBack, Efficiency, Linearity, Frequency Transformation Technique, Third Order Intermodulation Point IMD3Abstract
In this paper, a design and an optimization of feedback multi-band 65-nm CMOS power amplifier (PA) have been developed, based on the frequency transformation technique (FTT), in way to improve PA’s performances. The FT Technique aims to transform an off-chip single-band matching networks considered as low-pass (LP) filters to that of triple-band matching networks (MN). An RC-feedback was firstly added in thourough manner to boost the linearity. An ideal simulations have led to good results in terms of different performances. In fact, after optimizations in the triple band MN and RC-feedback, PA’s performances at central frequencies bands of 0.94, 1.94 and 2.44 GHz reached: (24.6 dBm, 24 dB, and 57.5%), (22.74 dBm, 20.48 dB and 48.9 %) and (25.8 dBm, 21.53 dB and 63.7 %), respectively. In addition, for the same central-frequencies, the output referred intermodulation third order point has given: 32.34, 22.06 and 32.34 dBm, respectively.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 International Journal of Scientific Research and Modern Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PlumX Metrics takes 2–4 working days to display the details. As the paper receives citations, PlumX Metrics will update accordingly.