Chemical Bath Deposition of Vanadium(V) Oxide Xerogel Thin Films Through In Situ Hydrolysis of Diethyl Sulfate
DOI:
https://doi.org/10.38124/ijsrmt.v1i10.1781Keywords:
Chemical Bath Deposition, Vanadium(V) Oxide Xerogel, Diethyl Sulfate, Thin Films, Layered Structure, Ammonium IntercalationAbstract
Thin films of a hydrated, ammonium-intercalated vanadium(V) oxide xerogel were grown on fluorine-doped tin oxide glass by a modified chemical bath deposition route in which the acid required for condensation of the vanadate precursor is generated inside the bath itself. Heating a dilute aqueous solution of ammonium metavanadate containing diethyl sulfate to 90 °C hydrolyses the ester and lowers the bath pH from 6 to 2 without external addition of acid, so that acidification, nucleation and growth proceed as a single self-regulating process. Deposition begins after an induction period of about 50 min, marked by the appearance of a yellow-brown solid, and film thickness is then set by immersion time: films between 70 and 440 nm were obtained for deposition times of 10 to 30 min, growth being slow and almost linear over the first 20 min and faster thereafter. X-ray diffraction of both the film and the precipitate recovered from the bath shows only the 001 series of a layered xerogel with an interlayer spacing of 11.0 Å, which indicates a water content below 1.5 mol per formula unit. Infrared spectra confirm the V2O5 framework of the xerogel and reveal bands of intercalated ammonium ions that leave the V–O vibrations unperturbed. Thermal analysis gives a total mass loss of 9.61 wt%, consistent with the composition (NH4)0.15 V2O5·H2O.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 International Journal of Scientific Research and Modern Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PlumX Metrics takes 2–4 working days to display the details. As the paper receives citations, PlumX Metrics will update accordingly.