Measurement of Strength Property of Finger Root Natural Fibre Reinforced Polymer Composite
DOI:
https://doi.org/10.5281/zenodo.14608479Abstract
This research investigates the mechanical properties of finger-root natural fiber-reinforced polymer composites (FRPC) for potential use in construction and other structural applications. The study explores the extraction, pre treatment, and chemical modification of finger-root fibers to enhance compatibility with polyester resin. Key mechanical properties, including tensile strength, flexural strength, and creep behavior, were evaluated experimentally using standard ASTM methods. Results show that treated fibers exhibited improved tensile strength (79.6 N/mm2) compared to untreated fibers, with minimal creep deformation (2.0870e-004 sec−1), highlighting their suitability for load-bearing applications. The findings suggest that finger- root fibers, as renewable and low-cost reinforcements, offer a sustainable alternative to synthetic fibers like glass and carbon. These composites demonstrate potential for reducing structural self-weight, promoting eco-friendly practices, and lowering production costs in the construction industry. Recommendations are made for future applications and optimization in industrial-scale production.
Downloads
References
Humphreys, Matthew (2003) The Use of Polymer Composites in Construction. In Yang, Jay (Ed.) Proceedings of the CIB 2003 Int’l conference on Smart and Sustainable Built Environment. Queensland University of Technology, Australia, Queensland, Brisbane, pp. 1-9.
Aref, A. J. and Parsons, I. D. (1996). “Design and Analysis Procedures for a Novel Fiber
Reinforced Plastic Bridge Deck”, Advanced Composite Materials in Bridges
and Structures, CSCE, Montreal, Quebec, Canada, pp. 743-750.
Bank, L.C. and Gentry, T. R., (2000). “Composite Materials for Roadside Safety
Structures”, Proceedings of ACUN-II International Composites Conference, University of New South Wales, Australia
Barbero, E., GangaRao, H.V.S. (1991). “Structural Applications of Composites in
Infrastructure”, SAMPE Journal, Vol 27, No 6, SAMPE, USA.
Barbero, E. J., Fu, S. H. and Raftoyiannis, I. (1991). “Ultimate Bending Strength of
Composite Beams”, Journal of Materials in Civil Engineering, Vol.3, No.4, November, pp. 292-306.
Ballinger, C. A. (1990). “Structural FRP composites-Civil Engineering’s Material of the
Future?”, Civil Engineering, ASCE, 60(7), pp. 63-65.
Bank, L. C., (1989). “Properties of Pultruded Fiber Reinforced Plastic Structural
Members”, Transportation Research Record 1223, Transportation Research
Board, Washington D.C., pp. 117-124.
Bledzki A K, and Gassan J. (1999). Prog. Polym. Sci. 24 221
Carse, A., (1997). “The Asset Management of a Long Bridge Structure Affected by
Alkali-Silica Reaction”, Proceedings of Concrete ’97 Conference, Concrete Institute of
Australia, Adelaide
chakrapan tuakta (2004), “use of fiber reinforced polymer composite in bridge structures”
Conrad Kathrine, (2008). Correlation between the distribution of lignin and pectin and distribution of sorbed metal ions (lead and zinc) on coir (Cocos nucifera L.), Bioresource Technology 99:8476–8484
Davalos, J. F., and Qiao, P. (1997). “Analytical and Experimental Study of Lateral and
Distortional Buckling of FRP Wide-Flange Beams”, Journal of Composites for Construction, Vol. 1, No. 4, pp. 150-159.
Dufresne A, Caville J and Vignon M 1997 J. Appl. Polym. Sci. 64 1185
Fisher, S., Roman, I., Harel, H., Marom, G., and Wagner, H. D. (1981). “Simultaneous
Determination of Shear and Young’s Moduli in Composites”, Journal of Testing and Evaluation, Vol.9, No.5, September, pp. 303-307.
Erhard, Gunter (2006). Designing with Plastics. Trans. Martin Thompson. Munich Hanser Publishers. Available November 2014: http://en.wikipedia.org/wiki/Fibre-reinforced_plastic.
Gowripalan N., (1999). “Fibre reinforced Polymer (FRP) Applications for
Prestressed Concrete Bridges”, Proceedings of ACUN 1 Conference Composites:
Innovations and Structural Applications, UNSW, Australia
Gowripolan, N., 2000, “Design Considerations for Prestressed Concrete Beams
with Fibre Reinforced Polymer (FRP) Tendons”, Fibre Composites: Who Needs Them?,
A Workshop for Civil and Structural Engineers, University of Southern Queensland,
Australia
Hale, J. M., (1997).“Strength Reduction of GRP Composites Exposed to High
Temperature Marine Environments”, Proceedings of ICCM11 International Conference on Composite Materials, Australian Composites Structures Society, Australia
Hollaway, L. (2002). “The Development and the Future of Advanced Polymer
Composites in the Civil Infrastructure”, Proceedings of the International Conference on
Advanced Composites in Construction, University of Southampton
Humphreys M. F. (2002). The use of polymer composites in construction
ISIS Canada, 1998). The University of Manitoba,Canada ISIS Annual Report 1997/1998.
Karbhari, V.M., Seible, F., Heigemier, G. A. and Zhao, L. (1997). “Fiber Reinforced
Composite Decks for Infrastructure Renewal - Results and Issues”,
Proceedings of International Composites Expo, Session 3-C, pp. 1-6.
Karbhari, V. M. (1999). “Structural Characterization of Fiber-Reinforced
Composite Short- and Medium-Span Bridge Systems”, Developments In Design
Standards, CRC-ACS, Australia
Karbhari, V. M., Zhao, L., (2000). “The Use of Composites for Twenty-First
Century Civil Infrastructure”, Fibre Composites: Who Needs Them?, A Workshop for
Civil and Structural Engineers, University of Southern Queensland, Australia
Ko, K. (1997). “Fibre Architecture Based Design of Ductile Composite Rebar
for Concrete Structures”, Proceedings of ICCM-11: International Conference on
Composite Materials, Australian Composites Structures Society, Australia.
Mohanty AK, Drzal LT, Misra M. (2002). Engineered natural .ber reinforced polypropylene composites: in.uence of surface modi-.cations and novel powder impregnation processing. J Adhes Sci Technol 16(8):999–1015.
Nagraj, V. and Gangarao, H. V. S. (1993). “ Characterization of GFRP Pultruded Box
Beams Under Static and Fatigue Loads”, SAMPE Quarterly (Journal of Advanced Materials), Vol.24, No.4, pp. 3-9.
Oehlers, D. J. (2000). “Development of Design Rules for Retrofitting by Adhesive
Bonding or Bolting Either FRP or Steel Plates to RC beams in Bridges and Buildings. ACUN2, UNSW, Australia
Panthapulakkal S, Zereshkian A and Sain M 2006 Bioresource Technol. 97 265
Prakash Kumar, K. Chandrashekhara and Antonio Nanni,(2001).“Testing and Evaluation of Components for a Composite bridge Deck,” Journal of Reinforced Plastic s and Composites.
Prakash tudu (2009). Processing and characterization of natural fiber reinforced polymer composites.
Ravi Jain, Luke lee (2012). Fiber Reinforced Polymer (FRP) Composites for Infrastructure
Applications. Focusing on Innovation, Technology Implementation and Sustainability.
Springer
Singha, A, S., vijay kumar thakur. (2007). Mechanical properties of natural fibre reinforced polymer composites
Sain M M and Kokta B V (1994) Polym.–Plast. Technol. Eng. 33 89
Singha A S and Thakur Vijay K. (2007) Int. J. Plast. Technol. 11 835
Sotiropoulos, S. N., Gangarao, H. V. S., and Allison, R. W. (1994). “Structural Efficiency of Pultruded FRP Bolted and Adhesive Connections”, Proceedings of 49th Annual Conference, Composite Institute, The Society of Plastics Industry Inc., Cincinnati, Ohio, SPI/Composite Institute, New York, N.Y.
Weaver, A., (1999). “Composites: Worldwide Markets and Opportunities”,
Materials Today
Zureick, A. H., Shih, B., and Munley, E. (1995). “Fiber-Reinforced Polymeric Bridge
Decks”, Structural Engineering Review, Vol.7, No.3, pp. 257-266.
Verma et al. 2013. “Coir Fibre Reinforcement and Application in Polymer Composites: A Review.”
https://studylib.net/doc/18673928/coir-fibre-reinforcement-and-application-in-polymer-compo.
K. G. Satyanarayana et al. 1990.“Natural Fibre Polymer Composites” https://www.scribd.com/document/419347690/Natural-Fibre-polymer-Composites
Wikipedia. 2010. “Fiber-reinforced composite.” https://en.wikipedia.org/wiki/Fiber-reinforced_composite
Kumar , A (2014) “A study on mechanical behaviour of hair fiber reinforced epoxy composites.” http://ethesis.nitrkl.ac.in/5532/
Garg, Arun, "Natural fiber reinforced soy-based composites" (2002). Masters Theses. 2298.
https://scholarsmine.mst.edu/masters_theses/2298
https://www.mst.edu/search/?q=fiber+reinforced+natural+composites
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 International Journal of Scientific Research and Modern Technology
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PlumX Metrics takes 2–4 working days to display the details. As the paper receives citations, PlumX Metrics will update accordingly.
