Structural Performance of Mivan Structural System Over Conventional Structural System

Authors

  • Nisarga K PG Student(Computer Aided Design Of Structures) Department of Studies in Civil Engineering, University B.D.T. College of Engineering, Davangere, Karnataka, India
  • Madhukaran Assistant Professor Department of Studies in Civil Engineering, University B.D.T. College of Engineering, Davangere, Karnataka, India

DOI:

https://doi.org/10.38124/ijsrmt.v1i1.2

Keywords:

Mivan Structure(MS), Framed Structure(FS), Conventional Structure Shear wall, Storey Displacement, Storey Drift, Base Shear, Time Period, Frequencies, Response Spectrum Analysis, ETABS

Abstract

India's metropolitan population is now the world's second-largest, and its projected growth is causing more demand in housing. To deal with this problem, India must urgently prepare for the acquisition of land and the rapid construction of housing units. In recent years, there have been significant modifications in the construction process. Buildings were created with the aim of load-bearing in mind in ancient times, and the RCC framed approach was established later. The RC structural wall technology is widely used at the moment. Aluminium formwork, also known as Mivan technology, is a more advanced advancement of the current building approach. This technology uses an RC structural wall system to design the entire construction, which is also known as a Shear wall system. It is primarily meant to allow.

Downloads

Download data is not yet available.

References

K. Suhanth Reddy and CH.Rajesh (2017) “Analysis of Conventional Beam Column System over RC Structural Wall System in Multi Storey Building” International Journal & Magazine of Engineering, Technology, Management, and Research, May 2017.

Miss. Mrunal S. Khobragade and Dr. A. V. Patil (2018) “Comparative Study in Analysis, Design and Material Requirement of Conventional Structural System and Frameless R.C.C structural System” Volume 8, Issue IV, APRIL 2018.

D.Ramyaand A.V.S.Sai Kumar (2015) “comparative study on design and analysis of multi-storeyed building (g+10) by staad.pro and etabs software’s” internationaljournal of engineering sciences & research technology, October 2015.

Kavita Patgar and Dr. Srinath Shetty K (2015) “Conventional formwork &mivan formwork structure – A comparative study &analysis” .JHJOC, 2018.

Sajeet.S.B and Supreeth S Gowda (2015) “earthquake response of different shapes of mivan wall tall buildings” International Journal of Research in Engineering and Technology.

Anagha M (2016) “Earthquake Response of Different Shapes of Tall Vertically Irregular Mivan Wall Building” International Journal of Engineering Research & Technology (IJERT) Vol. 5 Issue 08, August-2016.

Deepak Suthar and H.S.Chore (2014) “High Rise Structure Subjected To Seismic Forces And Its Behavior” International Conference, 29th June-2014.

Pawan M. Walvekar and Hemant L. Sonawadekar (2017) “Seismic Performance Evaluation of Mivan Structural System v/s Conventional Structural System with Effect of SSI by Pushover Analysis” International Research Journal of Engineering and Technology (IRJET), Volume: 04 Issue: 06 June-2017.

G. Prasanna Lakshmi and Dr Hemant L.Sonawadekar (2016) “Seismic Evaluation of Residential Building with Masonry Wall using ETABS” International Journal of Engineering Sciences & Research Technology, ISSN: 2277-9655, May-2016.

Abhay Guleria (2014) “Structural Analysis of a Multi Storeyed Building using ETABS for different Plan Configurations” International Journal of Engineering Research and Technology (IJERT), ISSN: 2278-0181, Vol. 3, Issue 05, May-2014.

Mr N.B Basraskar and Prof. U.R. Kawade (2015) “Structural Performance of RC Structural wall system over conventional Beam-Column system in G+15 storey Building” International Journal of Engineering Research and General Science, Vol. 3, Issue 04, July/August-2015.

IS-1893:2016, “Code for earthquake resistant design of structures- general provisions for buildings, Part I, Bureau of Indian Standards”, New Delhi.

IS-456:2000, “Code of practice for plain and reinforced concrete code of practice”, Bureau of Indian Standards, New Delhi, 2000.

IS-875:1987, “Code for Dead load design of structures- general provisions for buildings”, Part I, Bureau of Indian Standards”, New Delhi.

Bureau of Indian Standards, New Delhi, IS-875:1987, “Code for Live Load Design of Structures- General Provisions for Buildings”, Part II.

IS-875:1987, Part III, Design Loads Except Earthquake(Wind Load) for Buildings and Structures.

IS 13920: 1993 is a 1993 standard that was created. Clause 9, it stipulates the ductile details of shear walls, According to IS: 13920: 1993, the first clause defines the basic criteria, whereas article 9.2 describes the shear wall ductwork. The quantity of reinforcement required as well as the bar orientation are specifie in the ductile details.

@article{article, author = {Aryal, Sabita and Qiang, Liu}, year = {2024}, month = {04}, pages = {1179-1184}, title = {Implications of Adnexal Invasions in Primary Extramammary Paget’s Disease: A Systematic Review}, journal = {International Journal of Innovative Science and Research Technology (IJISRT)}, doi = {10.38124/ijisrt/IJISRT24APR2251} }

Yogesh Kumar. C (2024), A Study to Evaluate Psychological Distress and Self-Esteem Among Patients with Hemodialysis. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24MAR1998, 2491-2501. DOI: 10.38124/ijisrt/IJISRT24MAR1998. https://www.ijisrt.com/a-study-to-evaluate-psychological-distress-and-selfesteem-among-patients-with-hemodialysis

Baemedi Monthusi Kaisara (2024), Status of Instructional Leadership Practices in Botswana's Public Technical and Vocational Education and Training: A Case of Brigades. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24MAR1339, 1447-1453. DOI: 10.38124/ijisrt/IJISRT24MAR1339. https://www.ijisrt.com/status-of-instructional-leadership-practices-in-botswanas-public-technical-and-vocational-education-and-training-a-case-of-brigades

Swati Kolhatkar, Samir Kalambe, Mumtaz Khan, Vaishnavi Borkar, Sanket Kirnapure, Virag Sapate (2024), Power Generation from Footsteps by Using Piezoelectric Sensor. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24MAR1599, 2188-2189. DOI: 10.38124/ijisrt/IJISRT24MAR1599. https://www.ijisrt.com/power-generation-from-footsteps-by-using-piezoelectric-sensor

Samuel Phiri (2024), Zambian Consumers and the Country-of-Origin Effect. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24APR885, 585-593. DOI: 10.38124/ijisrt/IJISRT24APR885. https://www.ijisrt.com/zambian-consumers-and-the-countryoforigin-effect

Prabavathi R, Subha P, Bhuvaneswari M, Prithisha V, Roshini K (2024), IoT Based Soil pH Detection and Crop Recommendation System. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24APR532, 450-456. DOI: 10.38124/ijisrt/IJISRT24APR532. https://www.ijisrt.com/iot-based-soil-ph-detection-and-crop-recommendation-system

Anjana Priyadarshani Kanathala, Srinivas Naik Kethavath, Prashanth Bollempally, Anjana Wahengbam, Prashant Singam, Sriya Reddy Patlolla (2024), High Efficiency In vitro Whole Plant Regeneration via Desiccated Callus in Oryza sativa cv. MTU1010. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24MAR1492, 1335-1340. DOI: 10.38124/ijisrt/IJISRT24MAR1492. https://www.ijisrt.com/high-efficiency-in-vitro-whole-plant-regeneration-via-desiccated-callus-in-oryza-sativa-cv-

N.O. Ukwu, I.U Onyenanu, K. C. Owuama (2024), Development of a Low-Cost Banana Fiber Extractor. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24APR2282, 1672-1681. DOI: 10.38124/ijisrt/IJISRT24APR2282. https://www.ijisrt.com/development-of-a-lowcost-banana-fiber-extractor

I.U Onyenanu, U.O. Uwadibe (2024), Development of a Cost-Effective Coconut Dehusking Machine. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24APR2283, 1682-1690. DOI: 10.38124/ijisrt/IJISRT24APR2283. https://www.ijisrt.com/development-of-a-costeffective-coconut-dehusking-machine

Seyed Masoud Ghoreishi Mokri, Newsha Valadbeygi, Khafaji Mohammed Balyasimovich (2024), Diagnosis and Evaluation of Stomach Surgery with CNN Neural Network. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24APR2410, 1858-1864. DOI: 10.38124/ijisrt/IJISRT24APR2410. https://www.ijisrt.com/diagnosis-and-evaluation-of-stomach-surgery-with-cnn-neural-network

Seyed Masoud Ghoreishi Mokri, Newsha Valadbeygi, Khafaji Mohammed Balyasimovich (2024), Using RNN Artificial Neural Network to Predict the Occurrence of Gastric Cancer in the Future of the World. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24APR2513, 1865-1871. DOI: 10.38124/ijisrt/IJISRT24APR2513 . https://www.ijisrt.com/using-rnn-artificial-neural-network-to-predict-the-occurrence-of-gastric-cancer-in-the-future-of-the-world

ZEWAR Shah, SHAN Zhiyong, Adnan . (2024), Enhancements in Immediate Speech Emotion Detection: Harnessing Prosodic and Spectral Characteristics. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24APR872, 1526-1534. DOI: 10.38124/ijisrt/IJISRT24APR872. https://www.ijisrt.com/enhancements-in-immediate-speech-emotion-detection-harnessing-prosodic-and-spectral-characteristics

Priyanka Neelakrishnan (2024), AI-Driven Proactive Cloud Application Data Access Security. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24APR957, 510-521. DOI: 10.38124/ijisrt/IJISRT24APR957. https://www.ijisrt.com/aidriven-proactive-cloud-application-data-access-security

Mushtaq Ahmad Shah, Khomane Harish, Shradha ., Kutlu Hansda, Diksha Chowdhury, Sakshi Yadav (2024), Beyond Mobile Payments: Exploring the Evolution and Future of Fintech. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24APR259, 468-473. DOI: 10.38124/ijisrt/IJISRT24APR259. https://www.ijisrt.com/beyond-mobile-payments-exploring-the-evolution-and-future-of-fintech

Babatunde Moshood Adegbite (2024), Applying Lean Principles to Eliminate Project Waste, Maximize Value, Cut Superfluous Steps, Reduce Rework and Focus on Customer Centricity. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24FEB1682, 1760-1768. DOI: 10.38124/ijisrt/IJISRT24FEB1682. https://www.ijisrt.com/applying-lean-principles-to-eliminate-project-waste-maximize-value-cut-superfluous-steps-reduce-rework-and-focus-on-customer-centricity

Yogi Andrew Taruk Padang, Andi Alief Utama Armyn, Yulius Patimang (2024), Giant Left Atrial Myxoma Revealed by Neurological Manifestation in a Young Female Patient. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24MAR1079, 1249-1256. DOI: 10.38124/ijisrt/IJISRT24MAR1079. https://www.ijisrt.com/giant-left-atrial-myxoma-revealed-by-neurological-manifestation-in-a-young-female-patient

Manish Prasad Gupta (2024), Review on Childhood Obesity: Discussing Effects of Gestational Age at Birth and Spotting Association of Postterm Birth with Childhood Obesity. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24MAY162, 8-17. DOI: 10.38124/ijisrt/IJISRT24MAY162. https://www.ijisrt.com/review-on-childhood-obesity-discussing-effects-of-gestational-age-at-birth-and-spotting-association-of-postterm-birth-with-childhood-obesity

Fatih Oktavia Ningsih (2024), Analyzing the Implementation of Green Industries Practice at PT. Semen Indonesia (Persero) Tbk. Tuban Plant towards Achieving Sustainable Development Goals. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24MAY588, 442-445. DOI: 10.38124/ijisrt/IJISRT24MAY588. https://www.ijisrt.com/analyzing-the-implementation-of-green-industries-practice-at-pt-semen-indonesia-persero-tbk-tuban-plant-towards-achieving-sustainable-development-goals

Ashadu Jaman Shawon, Ibrahim Ibne Mostafa Gazi, Humaira Rashid Hiya, Ajoy Roy (2024), Osteoporosis Prediction Using VGG16 and ResNet50. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24APR2565, 2489-2492. DOI: 10.38124/ijisrt/IJISRT24APR2565. https://www.ijisrt.com/osteoporosis-prediction-using-vgg16-and-resnet50

ODIRI V.I.O., OHWOVORIOLE, Oviebemre, ISIAKA, Ganiyu Abiodun, OMOKHUALE, Omeniah Christopher, IGEMOHIA, Mohammed, OHWOJERO, Obaro Kelvin (2024), Firm Size as a Mediator between Inventory Management Andperformance of Nigerian Companies. International Journal of Innovative Science and Research Technology (IJISRT) IJISRT24MAY952, 446-453. DOI: 10.38124/ijisrt/IJISRT24MAY952. https://www.ijisrt.com/firm-size-as-a-mediator-between-inventory-management-andperformance-of-nigerian-companies

Yi-Ming Jen, Chih-Wei Ko, Hong-Bin Lin, Effect of the amount of adhesive on the bending fatigue strength of adhesively bonded aluminum honeycomb sandwich beams, International Journal of Fatigue 31 (2009), 455–462.

Zukas JA, Nicholas T, Swift HF, Greszczuk LB, Curran DR, editors. Impact Dynamics. New York: Wiley, (1982), 1-13.

Downloads

Published

2022-01-25

How to Cite

K, N., & M, M. (2022). Structural Performance of Mivan Structural System Over Conventional Structural System. International Journal of Scientific Research and Modern Technology, 1(1). https://doi.org/10.38124/ijsrmt.v1i1.2

Similar Articles

1 2 3 > >> 

You may also start an advanced similarity search for this article.